Kus 150mm Standard American 240-33ohm Unità Di Italia

Output signal: 0~190 ohm (Standard European), 240~33 ohm (Standard American) Resolution Range: 10~40mm Operational Temperature: -40°F ~ +185°F (-40℃ ~ +85℃) Fuel Sending Unit Type: Resistance Rated current for alarm switch: 500mA Protection Rank: IP67 Mounting Methods: Standard SAE 5 hole pattern Warranty: 1 Year Attention : 0-190 ohm sensor fit for 0-190 ohm fuel/water Level gauge(0 ohms at empty, 190 ohms at full). 240-33 ohm sensor fit for 240-33 ohm fuel/water Level gauge(240 ohms at empty, 33 ohms at full). NOTE !!! Sensor Length: 150 / 175/ 200/ 225/ 250/ 275/ 300/ 350/ 400/ 450/ 500/ 550/600 mm can be choose. Output signal: 0~190 ohm (Standard European), 240~33 ohm (Standard American). ——————Please choose one length range & signal you need when placing the order——————— The fuel sending unit is a direct replacement for arm type transmitters. The advantages of fuel level sensors are accurate measurement, long service life, good impact resistance and corrosion resistance, ensuring your safety. The fuel tank sending device is made of heavy-duty 316 stainless steel, with a simple and unique structure that is resistant to vibration, explosion, and corrosion. SAE 5-hole installation mode, damping cover is optional and assembled with C-ring for easy installation. Simple Installation: Damping cover is optional, and assembled with C-ring, easy for installation. Just remove old fuel gas sender then install new fuel level sensor, installation only takes about 15 minutes Notice: Please note whether the selected length is correct before purchasing, because the length of the fuel level transmitter should be less than the depth of the tank, the length of the fuel level transmitter should be short depending on the tank material